基于调整型的战术导弹批检试验抽样方案设计

为通过批检试验准确检验导弹的质量,提出基于调整型的战术导弹批检试验抽样方案设计思路。调整型抽样检验方法的应用,可适时调整抽样方案的宽严程度,提高检验效率,并为订货方和生产方提供适当的风险保护,把抽样检验和导弹的质量变化联系在一起形成一个动态检验过程。     

中亚来华留学生汉语学习动机差异性分析

本文通过对新疆师范大学的中亚来华留学生学习动机进行调查,用差异性检验方法,从性别、学历方面进行数据统计分析,从而发现问题,得出结论,为留学生汉语学习动机问题的研究提供参考。     

不完全信息的装备采购博弈

目前,我国的军品市场正由封闭市场向一个相对开放竞争的环境转变。基于不完全信息的装备采购的博弈模型,探讨了在不完全信息的相对开放的竞争环境下,军企双方对对方的策略、偏好、所处的地位或者状态的信息等策略问题进行了解,并给出了求解方法,通过实例进行了说明,对装备采购实践具有一定的指导意义。     

基于PC104总线的数字量变换器测试系统设计

本系统采用模块化设计思想,主要由PC104主板、FPGA及相应接口电路组成,实现对某型号数字量变换器的测试,可以向数字量变换器提供特定的数字信号源,并且可以接收数字量变换器发送的PCM码流,通过计算机软件进行数据显示、存储和分析。     

船舶静态电场跟踪的渐进更新扩展卡尔曼滤波器

为了实现利用船舶静态电场对船舶进行跟踪的目的,针对传统卡尔曼滤波算法中存在的问题,设计一种新的非线性滤波器。建立船舶的状态空间模型,分析传统卡尔曼滤波算法在船舶跟踪中存在的问题;依据渐进贝叶斯思想,利用连续白噪声与离散白噪声序列噪声协方差之间的关系,设计一种新的渐进更新扩展卡尔曼滤波器。仿真结果表明,该滤波器能有效地抑制由于初始误差较大而造成的滤波性能下降和滤波发散,能够有效地跟踪船舶,具有较高的实用价值。     

二维超声速空气引射器启动特性试验研究

超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空,可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据:当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

改进的Euler方法应用于非线性方程求根

本文通过引入动力系统，将改进的Euler方法应用于非线性方程求根问题，给出非线性方程求根的预估-再校正迭代格式，证明了该格式至少二阶收敛并可以调节参数达到超收敛。最后给出数值实验，数值结果验证了算法的有效性。     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008